| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Interior | Section: Lighting (int) | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003GLW000X |
| Title: LIGHTING (INT): FRONT DOOR COURTESY SWITCH: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL COURTESY LIGHT SWITCH
|
(a) Connect the connector. |
(b) Using "TORX" socket wrench T30, install the courtesy light switch with the screw.
Torque: 3.7 N·m (38 kgf·cm, 33 in·lbf)
2. INSTALL LOWER CENTER PILLAR GARNISH
HINT:
Use the same procedure as for the RH side
.
3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP
HINT:
Use the same procedure as for the RH side
.
4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
HINT:
Use the same procedure as for the RH side
.
5. INSTALL REAR DOOR SCUFF PLATE
HINT:
Use the same procedure as for the RH side
.
6. INSTALL FRONT DOOR SCUFF PLATE
HINT:
Use the same procedure as for the RH side
.
|
|